Jump to content

Archived

This topic is now archived and is closed to further replies.

BobBobbyBobberoo

Does anything look wrong with these two guages? (SCS Tupolev 134)

Recommended Posts

http://farm4.static.flickr.com/3503/3797077994_c2e80bbb80_b.jpg <--------------------<<<<<<<(This is the picture)

 

 

1.) There is something definently wrong with these two guages indicating the the position of the aircraft...it shows my Tu-134A-3 sideways while im flying straight, how would I fix this problem?

 

2.) When taking off, the flaps should be set to 33 degrees on the Tu-134, am I correct?

 

Thank you, sorry for the beginner questions :)

Share this post


Link to post
Share on other sites

Hi! About flaps, it depends on take off conditions but in most cases it must be set to 33 degrees. As far as I can remember.

 

You haven't completed some preflight preparations, that's why these gagues look so strange. Unfortunatelly I can't remember what is have to be done to fix this problem.

Share this post


Link to post
Share on other sites

You have to turn on switches "ПО-7500" and "ПТ-1500" on panel (Shift+6). But only after engines start-up, cause APU in this case will shutdown due to overload.

Share this post


Link to post
Share on other sites

You have to turn on switches "ПО-7500" and "ПТ-1500" on panel (Shift+6). But only after engines start-up, cause APU in this case will shutdown due to overload.

 

Thank you =)!

Share this post


Link to post
Share on other sites

Hi! About flaps, it depends on take off conditions but in most cases it must be set to 33 degrees. As far as I can remember.

 

You haven't completed some preflight preparations, that's why these gagues look so strange. Unfortunatelly I can't remember what is have to be done to fix this problem.

 

Thank you :clapping:!

Share this post


Link to post
Share on other sites

Not at all! If any questions will appear again - ask.

 

I got my last question for the Tu-134, when I landed, I put my thrust in reverse, but I tried to put the speed brakes up by pressing "/" key, but it didn't work...I think there's another button that I might have to press to enable by speed brakes to open and close : /

Share this post


Link to post
Share on other sites

You must firstly to turn guard on on Shift+4 panel in the bottom left part with label ИНТЕРЦЕПТОРЫ (interceptors)

Share this post


Link to post
Share on other sites

You must firstly to turn guard on on Shift+4 panel in the bottom left part with label ИНТЕРЦЕПТОРЫ (interceptors)

 

Thanks bro! That's perfect! :sarcastic:

Share this post


Link to post
Share on other sites

You have to turn on switches "ПО-7500" and "ПТ-1500" on panel (Shift+6). But only after engines start-up, cause APU in this case will shutdown due to overload.

 

I'm on FS2004 now, I went to the Tu-134 but as you said, pressed shift-6, but there's no shift-6 in v1.0 of the Tu-134 :sarcastic:

 

http://farm3.static.flickr.com/2499/3804560092_71f675d0da_o.jpg <----------<<<<<(Screenshot)

 

Is this the "ПТ-1500" guage?

Share this post


Link to post
Share on other sites

The latest version is 1.2: download here

 

-----------------------------

Yes, ПТ-1500Ц & ПО-4500 (from the left) Between them reserved ПО-4500 (if main fails)

Share this post


Link to post
Share on other sites

The latest version is 1.2: download here

 

-----------------------------

Yes, ПТ-1500Ц & ПО-4500 (from the left) Between them reserved ПО-4500 (if main fails)

 

Thanks for the new version :), What are the "ПТ-1500Ц & ПО-4500" buttons used for? If they are in the right position what would it mean? And the left? And when would you activate them?

 

I fixed just one of the attitude indicators on the Tu-134 v1.2 by clicking this button:

 

http://farm3.static.flickr.com/2532/3805151476_dc19773c4b_b.jpg

 

http://farm4.static.flickr.com/3024/3804334857_cfd74d0417_b.jpg

 

But I can't seem to fix the other one :) , I think it's "button 28" on the Overhead Panel, but when I click it, it doesn't seem to correct the other attitude indicator (refer to the link below):

 

ubsoft.org/tu134_panel.pdf

 

Thanks you :)

Share this post


Link to post
Share on other sites

ПО-4500 & ПТ-1500 are invertors to one phase and three phase powering of gyrobased gauges. Left position - working (main), and right - reserved. On overhead panel you must turn all swithes in the up position instead of 1, 4, 33, 34, 36. 21, 22 - nav and anti collision lights. 38, 39 - retract/extend langing lights. 51, 52 - small/large light. If you will do all that I described, you ll get all gauges to be working.

Share this post


Link to post
Share on other sites

ПО-4500 & ПТ-1500 are invertors to one phase and three phase powering of gyrobased gauges. Left position - working (main), and right - reserved. On overhead panel you must turn all swithes in the up position instead of 1, 4, 33, 34, 36. 21, 22 - nav and anti collision lights. 38, 39 - retract/extend langing lights. 51, 52 - small/large light. If you will do all that I described, you ll get all gauges to be working.

 

Ahhh thanks bro, that was much needed help...are or were you a pilot of a Tu-134? You carry much knowledge with you! I'll try the instructions that you gave me :)

Share this post


Link to post
Share on other sites

No, An-24. Soviet aircrafts very seamless inside with much variations outside

Share this post


Link to post
Share on other sites

No, An-24. Soviet aircrafts very seamless inside with much variations outside

 

very interesting :sarcastic:! and very cool :)

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...